Free express shipping on orders over $100

Wi-Tek Solar CCTV KIT- WI-Solar IOT-KIT

Description

Description

WI-TEK SOLAR KIT FOR CCTV INCLUDES:
1 X Water Proof Enclosure Box WI-IOTBOX02
1 X Solar Powered PoE Switch WI-PS306GF-UPS-15A
1 X Cloud Controller WI-IOT100
1 X Industrial Gateway WI-IOT110
2 X WI-4G Antenna
1 x Lithium Battery 12.8V 100Ah (Bluetooth)

Datasheet
Tech Specs

WI-TEK SOLAR CCTV KIT- WI-SOLAR IOT-KIT

WI-IOTBOX02
Overall Size(W*H*D) 400*600*250mm

Inner Size(W*H*D)

350*560*240mm

Weight(kg)

15.8

Standard Parameter

Thickness

1.2mm

Material

SUS/Stainless Steel

Color

Light Grey + Grey

Protect Level

IP66, IK10

Door

1

Electrical Install

WI-IOTBOX02 Plate*3

Surface Treatment

Electrostatic Spraying

Installation

Junction, Distribution, Electrical, Battery, Control, Monitoring etc. Outdoor waterproof Enclosure Box

WI-TEK GIGA 5 PORTS UPS SOLAR SWITCH 15A -
WI-PS306GF-UPS-15A

Interface

5 10/100/1000Mbps RJ45 Ports
1 1000Mbps SFP Slot

PoE Ports (RJ45)

Port 1: 802.3bt PoE 60W 1/2/4/5 (+), 3/6/7/8 (-)
Port 2-3: 802.3af/at PoE 1/2(+), 3/6(-)
Port 4-5: 802.3af/at PoE 1/2(+), 3/6(-)
or Passive 24V PoE 24W 4/5(+), 7/8(-)

Network Media

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
100BASE-TX/1000Base-T: UTP category 5, 5e, 6 or above cable
(maximum 100m)
1000BASE-X: MMF, SMF 1000Base-L X:62.5μm/50μm MM(2m~550m) or 10μm
SMF(2m~5000m)

Fan Quantity

Fanless

Power Consumption

120W (max. with PoE device connected) 5W Max (without PoE output)

Power Supply

For 12V Battery: DC 15-32V
For 24V Battery: DC 30-57V

Power Priority

Solar Power - DC - Battery

Solar Controller Input

≤32V(12V standard)
≤45V(24V standard)300W Max

Battery Type

Lead acid/lithium

Battery Input

12/24V 15A

Exchange Capacity

12Gbps

Packet Forwarding Rate

8.94Mpps

Mac Address Table

2k

Jumbo Frame

10240Bytes

Protection Level

6kV Surge Immunity
6kV Air Discharge

Package Dimension

270×220×67 mm

Switch Dimension

160×130×34 mm

Gross Weight

1.56kg

Net Weight

0.73kg

Package Contents

1 x PoE Switch
1 x 24V 5A Power Adapter
1 x Power Cord
1 x Quick Installation Guide

Working Temperature

-20℃~60℃

Storage Temperature

30℃~70℃

Working Humidity

Working Humidity

Storage Humidity

5%~90% RH non-condensing

WI-IOT100

Interface 1*10/100Mbps PoE IN RJ45 port
1*10/100Mbps RJ45 port
Serial Port 1*RS-485 port
Signal: 485-A, 485-B, GND, VCC(5V)
Baud Rate: 300-230400 bps
Data bits: 8bits, 7bits
Stop bit: 1 bit, 2bits
Check bit: None, Even, Odd
Support software flow control
Flash 8MB
DDR2 64MB
LED Indicator 1*PWR, Power indicator, 1*SYS, System indicator
Reset Button Short press 1~3 seconds: Reboot the device.
Long press over 5 seconds: Restore the factory default configuration
Power Supply IEEE 802.3af PoE IN
12~54V DC (The two DC power supplies cannot be connected at the same time)
Power Consumption <1.8W(without RS-485 VCC output)
Dimensions 105*74*30mm
Weight 0.21kg
Package Dimensions 182*133*36mm
Package Weight 0.3kg
Fan Quantity Fan-less
Material Metal shell
Color Silver
Operating Environment -20°C to 65°C, 5%~95% (non-condensation)
Storage Environment -40°C to 70°C, 5%~95% (non-condensation)
WI-IOT110
Mobile 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
CPU MIPS 24Kc, 580 MHz , 300Mbps WiFi
Memory 16 MBytes Flash, 128MBytes DDR2 RAM
Ethernet 3 * 10/100 Ethernet ports: 1 * WAN (configurable as LAN, 60W PoE In), 2 * LAN (48V 12+ 36- PoE Out)
WAN PoE In Compatible with af(15W), at(30W), bt(60W)
Power supply 48 -60VDC, 2 pin DC connector
PoE Budget If PD power input, PoE output ≦50W
If power adaptor DC input, PoE output: 60W max
Connectors

1 * DC,
3 * Ethernet,
2 * Mobile SMA,
2 * WiFi RP-SMA,
1 * DB9 FeMale((RS232),
1 * Terminal (RS485/RS422 )

SIM 1 * external SIM holder
Operating temperature -30℃ ~ +65℃
Antenna WiFI 2*SMA 4G 2*SMA
Installation DIN-rail mounted
Dimensions (W*D*H) 45*95*145 mm
New weight 0.5 kg
Cellular 3GPP,3G/4G
Networking features NAT, Static/Dynamic routing, Firewall, OpenVPN
3-Years Warranty

Wi-Tek’s 3-year manufacturer warranty covers defects in materials or broken components that could affect the normal operation of the product. If a device is faulty, SECSOURCE will facilitate the warranty process with the manufacturer for you. We aim to do so in a manner that is as fast and efficient as possible. The warranty does not cover damage to the product resulting from incorrect installation or negligence, damage caused by a natural disaster, or theft.

Please note, that we do not cover inbound shipping of the return to us however if a replacement is to be sent we will cover outbound shipping to the customer. We will need the serial number of the product and your order number.

Please don’t ship us anything until you have had confirmation from a member of our team and they have given you an RMA number and return address. Contact us at support@secsource.com.au or 1300-049-519.


Wi-Tek Solar CCTV KIT- WI-Solar IOT-KIT

Product form

SKU: WI-SOLAR IOT-KIT

$4,765.00 $2,685.00 Incl. VAT

    • Guaranteed secure & safe checkout.

      paypal
    • FREE Express Courier Shipping for all orders over $100
    • 30-Day Returns Policy
    • Back to Base Australian Warranty & Tech Support
    • Australian Stock, No Grey Import Products

      Description

      Description

      WI-TEK SOLAR KIT FOR CCTV INCLUDES:
      1 X Water Proof Enclosure Box WI-IOTBOX02
      1 X Solar Powered PoE Switch WI-PS306GF-UPS-15A
      1 X Cloud Controller WI-IOT100
      1 X Industrial Gateway WI-IOT110
      2 X WI-4G Antenna
      1 x Lithium Battery 12.8V 100Ah (Bluetooth)

      Datasheet
      Tech Specs

      WI-TEK SOLAR CCTV KIT- WI-SOLAR IOT-KIT

      WI-IOTBOX02
      Overall Size(W*H*D) 400*600*250mm

      Inner Size(W*H*D)

      350*560*240mm

      Weight(kg)

      15.8

      Standard Parameter

      Thickness

      1.2mm

      Material

      SUS/Stainless Steel

      Color

      Light Grey + Grey

      Protect Level

      IP66, IK10

      Door

      1

      Electrical Install

      WI-IOTBOX02 Plate*3

      Surface Treatment

      Electrostatic Spraying

      Installation

      Junction, Distribution, Electrical, Battery, Control, Monitoring etc. Outdoor waterproof Enclosure Box

      WI-TEK GIGA 5 PORTS UPS SOLAR SWITCH 15A -
      WI-PS306GF-UPS-15A

      Interface

      5 10/100/1000Mbps RJ45 Ports
      1 1000Mbps SFP Slot

      PoE Ports (RJ45)

      Port 1: 802.3bt PoE 60W 1/2/4/5 (+), 3/6/7/8 (-)
      Port 2-3: 802.3af/at PoE 1/2(+), 3/6(-)
      Port 4-5: 802.3af/at PoE 1/2(+), 3/6(-)
      or Passive 24V PoE 24W 4/5(+), 7/8(-)

      Network Media

      10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
      100BASE-TX/1000Base-T: UTP category 5, 5e, 6 or above cable
      (maximum 100m)
      1000BASE-X: MMF, SMF 1000Base-L X:62.5μm/50μm MM(2m~550m) or 10μm
      SMF(2m~5000m)

      Fan Quantity

      Fanless

      Power Consumption

      120W (max. with PoE device connected) 5W Max (without PoE output)

      Power Supply

      For 12V Battery: DC 15-32V
      For 24V Battery: DC 30-57V

      Power Priority

      Solar Power - DC - Battery

      Solar Controller Input

      ≤32V(12V standard)
      ≤45V(24V standard)300W Max

      Battery Type

      Lead acid/lithium

      Battery Input

      12/24V 15A

      Exchange Capacity

      12Gbps

      Packet Forwarding Rate

      8.94Mpps

      Mac Address Table

      2k

      Jumbo Frame

      10240Bytes

      Protection Level

      6kV Surge Immunity
      6kV Air Discharge

      Package Dimension

      270×220×67 mm

      Switch Dimension

      160×130×34 mm

      Gross Weight

      1.56kg

      Net Weight

      0.73kg

      Package Contents

      1 x PoE Switch
      1 x 24V 5A Power Adapter
      1 x Power Cord
      1 x Quick Installation Guide

      Working Temperature

      -20℃~60℃

      Storage Temperature

      30℃~70℃

      Working Humidity

      Working Humidity

      Storage Humidity

      5%~90% RH non-condensing

      WI-IOT100

      Interface 1*10/100Mbps PoE IN RJ45 port
      1*10/100Mbps RJ45 port
      Serial Port 1*RS-485 port
      Signal: 485-A, 485-B, GND, VCC(5V)
      Baud Rate: 300-230400 bps
      Data bits: 8bits, 7bits
      Stop bit: 1 bit, 2bits
      Check bit: None, Even, Odd
      Support software flow control
      Flash 8MB
      DDR2 64MB
      LED Indicator 1*PWR, Power indicator, 1*SYS, System indicator
      Reset Button Short press 1~3 seconds: Reboot the device.
      Long press over 5 seconds: Restore the factory default configuration
      Power Supply IEEE 802.3af PoE IN
      12~54V DC (The two DC power supplies cannot be connected at the same time)
      Power Consumption <1.8W(without RS-485 VCC output)
      Dimensions 105*74*30mm
      Weight 0.21kg
      Package Dimensions 182*133*36mm
      Package Weight 0.3kg
      Fan Quantity Fan-less
      Material Metal shell
      Color Silver
      Operating Environment -20°C to 65°C, 5%~95% (non-condensation)
      Storage Environment -40°C to 70°C, 5%~95% (non-condensation)
      WI-IOT110
      Mobile 4G (LTE) – Cat 4 DL up to 150 Mbps, UL up to 50Mbps; DC-HSPA+; UMTS; TD-SCDMA; EDGE; GPRS
      CPU MIPS 24Kc, 580 MHz , 300Mbps WiFi
      Memory 16 MBytes Flash, 128MBytes DDR2 RAM
      Ethernet 3 * 10/100 Ethernet ports: 1 * WAN (configurable as LAN, 60W PoE In), 2 * LAN (48V 12+ 36- PoE Out)
      WAN PoE In Compatible with af(15W), at(30W), bt(60W)
      Power supply 48 -60VDC, 2 pin DC connector
      PoE Budget If PD power input, PoE output ≦50W
      If power adaptor DC input, PoE output: 60W max
      Connectors

      1 * DC,
      3 * Ethernet,
      2 * Mobile SMA,
      2 * WiFi RP-SMA,
      1 * DB9 FeMale((RS232),
      1 * Terminal (RS485/RS422 )

      SIM 1 * external SIM holder
      Operating temperature -30℃ ~ +65℃
      Antenna WiFI 2*SMA 4G 2*SMA
      Installation DIN-rail mounted
      Dimensions (W*D*H) 45*95*145 mm
      New weight 0.5 kg
      Cellular 3GPP,3G/4G
      Networking features NAT, Static/Dynamic routing, Firewall, OpenVPN
      3-Years Warranty

      Wi-Tek’s 3-year manufacturer warranty covers defects in materials or broken components that could affect the normal operation of the product. If a device is faulty, SECSOURCE will facilitate the warranty process with the manufacturer for you. We aim to do so in a manner that is as fast and efficient as possible. The warranty does not cover damage to the product resulting from incorrect installation or negligence, damage caused by a natural disaster, or theft.

      Please note, that we do not cover inbound shipping of the return to us however if a replacement is to be sent we will cover outbound shipping to the customer. We will need the serial number of the product and your order number.

      Please don’t ship us anything until you have had confirmation from a member of our team and they have given you an RMA number and return address. Contact us at support@secsource.com.au or 1300-049-519.


      Recently viewed products

      © 2024 Spy Monkey Surveillance, Powered by Shopify

        • American Express
        • Apple Pay
        • Google Pay
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account