Uniview PKC2641-Z28-IR-P is a 4MP LPR Bullet Camera with PoE and H.265 compression, featuring IR (warm light) for night surveillance, vehicle and license plate recognition, and robust IP67/IK10 protection. Equipped with a 1/1.8" CMOS sensor, Wise-ISP image enhancement, 2.8–12mm lens, and up to 60 fps video, it ensures clear, detailed footage in all lighting conditions.
Key Features
-
4MP High-Definition Imaging – 2688 × 1520 resolution at up to 60 fps for clear video and license plate capture.
-
1/1.8" CMOS Sensor – Progressive scan sensor ensures high image quality and low-noise performance.
-
Wise-ISP Technology – Enhances color, sharpness, and clarity for various light conditions.
-
Automatic Gain & White Balance – Maintains optimal brightness and color fidelity in different lighting.
-
IR Night Vision – Built-in IR LEDs with automatic on/off, up to 50 m illumination distance.
-
Vehicle & License Plate Recognition – Recognizes standard plates from multiple countries, supports allowlist/blocklist.
-
Edge Storage – Supports microSD card up to 512 GB with ANR for uninterrupted recording.
-
IP67 & IK10 Protection – Weatherproof and vandal-resistant housing for reliable outdoor operation.
-
PoE Support – Simplified installation with power and data over a single Ethernet cable.
Perfect For:
- License plate recognition and automated barrier control
- Perimeter monitoring of commercial or industrial sites
- Parking lots and open outdoor areas
- Entrance and exit monitoring at gates and roads
- Situations requiring high-resolution evidential recording
Installer Tips
- Use PoE to simplify cabling and setup.
- Install at 2.5–3 meters height for optimal coverage.
- Ensure proper lighting and avoid direct bright light sources.
- Adjust IR intensity to prevent overexposure at night.
- Select lens according to coverage needs: 2.8mm for wide, 12mm for longer distance.
- Use junction boxes and proper cable management outdoors.
Downloads
Quick-Read Specs
| Category |
Specification |
| Model |
PKC2641-Z28-IR-P |
| Max Resolution |
4 MP (2688 × 1520) |
| Sensor |
1/1.8" CMOS, progressive scan |
| Lens |
2.8 to 12 mm |
| Minimum Illumination |
0.0005 Lux (F1.4, color), 0 Lux with IR on |
| Day/Night |
IR-cut filter with auto switch (ICR) |
| Video Compression |
H.265/H.264 |
| WDR |
120 dB |
| Network Interface |
1 × 10/100 Mbps RJ45, PoE support |
| Edge Storage |
Micro SD up to 512 GB |
| Ingress Protection |
IP67, IK10 |
| Operating Temperature |
-40℃ to 60℃, ≤90% RH |
| Power Supply |
DC12V ±25%, PoE 802.3at class 4, max 20W |
3-Years Warranty
Uniview 3-Years Manufacturer Warranty!
Our Uniarch products are high-quality and durability-tested by Uniview engineers. Enjoy the peace of mind of a three-year warranty!
✔️ Authorised Uniview Dealer!
✔️ Australian Stock, No Grey Imports!
✔️ 3-Years Manufacturer Warranty!
Uniview offers a 2-year manufacturer warranty and SECSOURCE offer an additional 1-year warranty which covers defects in materials or broken components that could affect the normal operation of the product. In the event of a device being faulty, Uniview and SECSOURCE will repair or replace the faulty product at no cost.
The warranty does not cover damage to the product resulting from incorrect installation or negligence, damage caused by a natural disaster, or theft. SECSOURCE will facilitate any warranty claims on the customers' behalf with the manufacturer. If you think you have a faulty product, please contact our support team and we will gladly help you troubleshoot and determine that the product is indeed faulty. We aim to do so in a manner that is as fast and efficient as possible.
Once determined faulty you will need to return the product to us first so that we can pass it on to the manufacturer. We don’t wait for the manufacturer to send us a replacement, if your item is determined to be faulty we will have it replaced as soon as possible from new stock. Please note, we do not cover inbound shipping to us however if a replacement is to be sent we will cover outbound shipping to the customer.
We may need the serial number of the product and your order number. Please don’t ship us anything until you have had confirmation from one of our team and they have given you a return address.
You can contact us by email at support@secsource.com.au or phone on 1300 049 519.
